Back to all

Time Out: Suspension Problems in Pelham

May 22, 2022

Your vehicle's suspension system has two jobs: to prevent the passengers from getting tossed around inside the vehicle every time it hits a bump in the road and to keep the tires firmly planted on the road around every corner and over every bump.

To see your suspension system, you'll have to look under your vehicle. Anything that connects the wheels to the vehicle's frame is part of the suspension system. They're heavy-duty parts that work hard while you're driving and take a lot of wear and tear. Because of this, you should have your technician at Tuffy Pelham look at them once a year as part of your preventive maintenance routine. A good time for it is every time you get your alignment checked.

If your suspension is in trouble, you often feel it in how your vehicle drives. You should get a check of your suspension system: if the vehicle pulls to one side or wanders, if the steering is erratic, if your ride isn't as smooth as it should be, or if your vehicle handles poorly. Uneven tire wear can also indicate worn parts in your suspension system. If your shocks are leaking oil then they definitely need to be replaced. All in all, if you don't feel in control when you're driving, go get your suspension inspected.

Shocks and struts wear out. Wheel bearings may need to be repacked every few years. Some parts of your suspension may need to be lubricated whenever you change your oil. Preventive maintenance is the key to keeping your vehicle under control. Good care can prevent accidents for Pelham drivers.

If you are in an accident, even a minor one, it can damage your suspension system or knock your wheels out of alignment. Even hitting a curb, pothole or large rock can damage your suspension. A wheel balancing or alignment won't correct a suspension problem, and after any suspension work, you may need to get an alignment.

At Tuffy Pelham, we advise Pelham drivers never to procrastinate on getting their suspension system repaired. A damaged suspension system can lead to loss of control of a vehicle in an emergency situation and serious accidents.

Potholes are unsightly nuisances around Pelham, but they're also a major cause of suspension damage for Pelham vehicles. To avoid this, Pelham drivers should always keep their tires properly inflated. This gives the tires maximum resiliency. When you're driving around the Pelham area, avoid potholes if possible. If you can't avoid one, then slow down before driving over it. Slower speeds limit pothole damage. But if you're a little late detecting a pothole, don't brake on top of it. This will throw the vehicle's weight forward and increase the damage.

The suspension system may not be pretty to look at, but it provides you with a safe, comfortable ride — as long as you maintain it properly. You don't have to show it off, but you should be proud of it.

Tuffy Pelham
3422 Pelham Parkway
Pelham, Alabama 35124
205-624-2190
https://www.tuffypelham.com/

 

More articles from Tuffy Pelham

The Light Many Drivers Fear (Check Engine Light)

March 24, 2024

Ask just about any driver about one thing they fear seeing inside their vehicle and they'll say it's the Check Engine light coming on. You know, that little light on your instrument panel that is in the shape of a vehicle engine, often accompanied by the words Check, Check Engine, Check Engine Se... More

Singing a Different Tune (Up) (Tune Ups)

March 17, 2024

Engines required a lot more maintenance in earlier times. You'd have to have your spark plugs, wires, rotors, caps, distributor points, fuel and air filters changed periodically. There were mechanical adjustments of a vehicle's timing, dwell, spark gap and idle mixture, too. Unless you like to ... More

Automotive Tips from Tuffy Pelham: Rotor Problems

March 10, 2024

The brake rotor, or disc, is attached to your wheel. The brake pads rub on the rotor to slow your car when you are driving in Pelham.Rotors can warp, crack or become misaligned. They can also be damaged by worn out brake pads that scratch grooves into the surface. These conditions result in less ... More